How to make your own metal detector?

 How to make your own metal detector?

Metal detectors, such as any machine or device that have a lot of items. When it comes to a single Assembly, can be very important effort. If you have a little know part in use, and the process can be a little less arduous, but if electronic components are not in the interest of all your, it can get a bit demanding. So, build a metal detector from the current set of items is a vital option. Even if you're not familiar with the work of certain parts, this process takes very little time to do so. So, everything you need to start is, and some equipment and loads of determination and enthusiasm for the project.

 Read Also : Homemade metal detector

How to make your own metal detector?

Building a metal detector without reducing your closet, and requires careful consideration of the material at home and some tips. The project cannot be gentle creative activity, especially during leisure time. Some devices can be used readily available at home for this activity. For simple design you can start with the issue of disarmament (one with black in the middle of a stack in place), and AM/FM radio, tape or Velcro nylon straps used to link scientific calculator.

The project involves the use of very simple electromagnetic wave detection, which do not need to be an expert in the field of electronics to design one. Radio AM/FM is to be strapped to one side of the cover of the compact disc, divided by a central hole, using Velcro tape. This can be done simply by connecting one end of the Ribbon to the middle part of the radio and the other to one of the parts inside the cover of the CD. Thus, the first phase of the homemade metal detector, which is mountain radio gets completed. This should be on the rise of radio in such a way that any part of this hinders the mantle to put it back.

Read Also : Metal detector circuit diagram

The same steps must be repeated with a calculator. Could be linked to the back of the calculator to the other side of the issue of disarmament, with the tapes. Another important step in the installation, make sure the calculator as well as radio facing each other, we develop erect. Once this is done, the operational side of the metal detector to start. The radio should be tuned to the highest frequency on the am to the point where you can hear only static or receive the channel. In case, the highest frequency is allocated to a channel, make sure to set the radio frequency to the nearest with static. The next step is to run the calculator and gradually close the cover of the CD.

Switching on the calculator, you will hear noise from the case. This occurs because the electromagnetic signal emitted from the calculator and being detected by channel am radio. This is the setting for a low-cost, homemade metal detectors. The same group cannot detect the presence of metal object anywhere in the vicinity. Maybe, because they help discover some possession of the value that you want to always find them.