How To Hit Extremely Deep Targets With The Minelab CTX 3030
CTX 3030 is a novelty from the famous Australian manufacturer detectors Minelab. As well as in E-Trac, in 3030 the latest technologies, such as FeCo, Smartfind, FBS, etc. were used, along with which many new nuances and possibilities are presented. Due to the fact that the device, with its sealed coil and display, designed to dive into the water up to three meters, you now do not have to worry about the performance of your device, if it accidentally falls into a puddle or creek. moreover, you will be able to carry out search works even in the rain without fear. In addition, If you wish, you can complete your waterproof headphones (exclusively firm Minelab).
To effectively hit extremely deep targets with the Minelab CTX 3030, users can follow several strategies and utilize the detector's advanced features.
Understand the CTX 3030 Features
The CTX 3030 uses FBS 2 technology, allowing it to operate on multiple frequencies simultaneously. This enhances its ability to detect various metal types at greater depths. Utilize the Smartfind 2 feature for precise target identification, which helps distinguish between valuable targets and junk.
Optimize Settings for Depth
Increase the sensitivity settings to maximize depth detection. However, be cautious as higher sensitivity can also increase noise from ground minerals. Properly set the ground balance to minimize interference from mineralized soil, which can mask deeper signals. Use the auto ground balance feature for optimal results.
Choose the Right Search Mode
The CTX 3030 offers several preset modes (e.g., Coin, Relic). For deep targets, using the Relic mode may provide better depth capabilities due to its optimized settings for finding older, deeper items.
Coil Selection
A larger coil can cover more ground and reach deeper targets. The standard 11-inch coil is effective, but consider using a larger coil if available for deeper penetration.
Conduct Thorough Sweeps
Move the detector slowly and steadily over the ground. This allows more time for the detector to process signals from deeper targets. Ensure that your sweeps slightly overlap to avoid missing any potential targets.
Utilize GPS Features
Use the built-in GPS to mark areas where you’ve detected signals. This helps in systematically covering large areas and revisiting promising spots.
Environmental Considerations
Be aware of soil conditions that could affect detection depth. Wet or highly mineralized soils can hinder performance; consider timing your searches after dry spells when possible.
Practice Patience and Persistence
Deep targets often require patience; continue searching in promising areas even if initial attempts do not yield results. By leveraging the advanced features of the Minelab CTX 3030, adjusting settings appropriately, and employing effective searching techniques, users can significantly enhance their chances of detecting extremely deep targets. Regular practice and familiarity with the detector will further improve success rates in locating valuable treasures buried beneath the surface.
