Main menu

Pages

Ways of dealing with metal detectors

 Today we introduce some of the things that affect the quality Receive metal detectors during the search , in order to be thorough search we must take into account some of the things that may not have a lot of interested researchers for treasures with a metal detector . Metal detectors to search for treasures and coins


Sunlight : The sun’s rays have an effect on the quality of receiving signals through metal detector , especially in rocky areas , where the sun unlike the signal and dispersed and this imbalance may occur in the signal reception made ​​of metal . Metal detectors the most popular on the Internet


Ways of dealing with metal detectors



Air : it has a significant role in reducing the quality of the received signal from the metal detector , where the wind and air laden with atoms of metals , and this affects heavily on the work of raised metal detector .


Rocks: One of the most important of these rocks are basalt rock , which is rich in minerals , this may distract metal detector , and it gives an alert on such rocks .


Lime : limestone and the effect of not less than basalt rock , but it does not consist of metal, but it reflects the vibrational distribution , and this affects the work of a metal detector .


We mentioned some of the things that affect the operation of a metal detector , and now will recall the best ways in which we can use a metal detector .


The best times to use the metal detector is the night , and why it is at night increase the percentage of moisture in the air , and this is an appropriate time to strengthen Receive frequencies , and this is observed also in the process of receiving TV channels , where the reception at night better than the daytime.


Lack of winds in the area being searched out , because as we mentioned wind affect the quality of reception frequency metal detector .


Non-obvious rules for caring for a metal detector


A metal detector, like any other equipment, requires proper care. If you don't pay enough attention to the device, it can fail faster. To prevent this from happening, you need to know the basic, obvious and non-obvious, rules about caring for a metal detector.


We will remind you of these rules.


1. Store the metal detector and its accessories in a dry and cool place, away from direct sunlight. Also, do not store the device where extreme temperature fluctuations are possible (on the balcony, in the garage, in the car in the sun). Due to temperature changes, plastic loses its properties, cracks and crumbles. Damage to the control unit or coil lining quickly leads to damage to the electronics.


2. The battery/battery is the heart of any metal detector. For its reliable and uninterrupted operation, you should keep the battery charged. Most devices have lithium-ion batteries that are sensitive to high temperatures and settings turned to the maximum. If you maintain optimal storage conditions, you will significantly increase battery life. To reduce the loss of capacity when storing a lithium-ion battery, do not allow it to be completely discharged, keep the charge at least 40%. When you do not plan to use the metal detector for a long time, do not leave it completely discharged. And you don't need to be fully charged either.


3. Usually, the battery compartment or battery connector is provided with a cover or plug, which also requires maintenance. Wipe and clean it from debris. Pay attention if they are displaced, make sure that the position is correct - this way you will avoid moisture getting inside the device.


4. After you have arrived from the cop, do not forget to clean the metal detector. Wipe it with a damp rag. Waterproof metal detectors can be cleaned gently.


5. The barbell is also an important part of the structure. Wipe it after each trip. The coil too. It is a good idea to buy protection for a reel or make it yourself.


6. Never wash the metal detector with detergents, especially aggressive ones such as liquid for washing bathtubs, toilets, etc.


7. Do not spray insect repellents near the metal detector. Use them at least 2-3 meters away from the device to avoid problems. Repellents can damage plastic parts.


8. Do not try to open the control unit yourself if you do not have the appropriate education and skills. Take the device for repair.


9. Read the user manual carefully, especially the "Precautions", "Operating Instructions" and "Troubleshooting" sections. This will help you in your search.


In general, use the metal detector wisely. Follow the safety rules, and everything will be fine.